Plastic
any organic material with the ability to flow into a desired shape when heat and pressure are applied to it and to retain the shape when they are withdrawn.
Polyethylene
Polyethylene was discovered in 1933 by Reginald Gibson and Eric Fawcett at the British
industrial giant Imperial Chemical Industries (ICI). This material evolved
into two forms, low density polyethylene (LDPE) and high density polyethylene
(HDPE).
Polyethylene is cheap, flexible, durable, and chemically resistant. LDPE is used to make films and packaging materials, including plastic
bags, while HDPE is used more often to make containers, plumbing, and automotive fittings. While PE has low resistance to chemical attack,
it was found later that a PE container could be made much more robust by exposing it to fluorine gas, which modified the surface layer of
the container into the much tougher "polyfluoroethylene."
Polyethylene would lead, after the war, to another material, "polypropylene" (PP), which was discovered in the early 1950s. It is common in modern science and technology that the growth
of the general body of knowledge can lead to the same inventions in different places at about the same time, but polypropylene was an extreme
case of this phenomenon, being separately invented about nine times. It was a patent attorney's dream scenario, and litigation wasn't resolved
until 1989.
Polypropylene managed to survive the legal process, and two American chemists working for Phillips Petroleum of the Netherlands, Paul Hogan and Robert Banks, are now generally credited as the "official" inventors of the material. Polypropylene is similar to its ancestor, polyethylene, and shares polyethylene's low cost, but it is much more robust. It is used in everything from plastic bottles to carpets to plastic furniture, and is very heavily used in automobiles.
Composition and Types of Plastic
A plastic is made up principally of a binder together with plasticizers, fillers, pigments, and other additives. The binder gives a plastic its main characteristics and usually its name. Thus, polyvinyl chloride is both the name of a binder and the name of a plastic into which it is made. Binders may be natural materials, e.g., cellulose derivatives, casein, or milk protein, but are more commonly synthetic resins. In either case, the binder materials consist of very long chainlike molecules calledpolymers. Cellulose derivatives are made from cellulose, a naturally occurring polymer; casein is also a naturally occurring polymer. Synthetic resins are polymerized, or built up, from small simple molecules called monomers. Plasticizers are added to a binder to increase flexibility and toughness. Fillers are added to improve particular properties, e.g., hardness or resistance to shock. Pigments are used to impart various colors. Virtually any desired color or shape and many combinations of the properties of hardness, durability, elasticity, and resistance to heat, cold, and acid can be obtained in a plastic.
There are two basic types of plastic: thermosetting, which cannot be resoftened after being subjected to heat and pressure; and thermoplastic, which can be repeatedly softened and remolded by heat and pressure. When heat and pressure are applied to a thermoplastic binder, the chainlike polymers slide past each other, giving the material "plasticity." However, when heat and pressure are initially applied to a thermosetting binder, the molecular chains become cross-linked, thus preventing any slippage if heat and pressure are reapplied.
Molding of Plastic
Plastics are available in the form of bars, tubes, sheets, coils, and blocks, and these can be fabricated to specification. However, plastic articles are commonly manufactured from plastic powders in which desired shapes are fashioned by compression, transfer, injection, or extrusion molding. In compression molding, materials are generally placed immediately in mold cavities, where the application of heat and pressure makes them first plastic, then hard. The transfer method, in which the compound is plasticized by outside heating and then poured into a mold to harden, is used for designs with intricate shapes and great variations in wall thickness. Injection-molding machinery dissolves the plastic powder in a heating chamber and by plunger action forces it into cold molds, where the product sets. The operations take place at rigidly controlled temperatures and intervals. Extrusion molding employs a heating cylinder, pressure, and an extrusion die through which the molten plastic is sent and from which it exits in continuous form to be cut in lengths or coiled.
Environmental Considerations
Plastics are so durable that they will not rot or decay as do natural products such as those made of wood. As a result great amounts of discarded plastic products accumulate in the environment as waste. It has been suggested that plastics could be made to decompose slowly when exposed to sunlight by adding certain chemicals to them. Plastics present the additional problem of being difficult to burn. When placed in an incinerator, they tend to melt quickly and flow downward, clogging the incinerator's grate. They also emit harmful fumes; e.g., burning polyvinyl chloride gives off hydrogen chloride gas.
Development of Plastics
The first important plastic, was discovered (c.1869) by the American inventor John W. Hyatt and manufactured by him in 1872; it is a mixture of cellulose nitrate, camphor, and alcohol and is thermoplastic. However, plastics did not come into modern industrial use until after the production (1909) of Bakelite by the American chemist L. H. Baekeland. Bakelite, made by the polymerization of phenol and formaldehyde, is thermosetting. New uses for plastics are continually being discovered. Following World War II optical lenses, artificial eyes, and dentures of acrylic plastics, splints that X rays may pierce, nylon fibers, machine gears, fabric coatings, wall surfacing, and plastic lamination were developed. More recently a hydrophilic, or water-attracting, plastic suitable for use in non-irritating contact lenses has been developed. Among the trade names by which many plastic products are widely known are Plexiglas, Lucite, Polaroid, Cellophane, Vinylite, and Koroseal. Plastics reinforced with fiberglass are used for boats, automobile bodies, furniture, and building panels.
© 2008 Plasticimports.com All rights rese
rved.
|